PRODUCT TYPE: WH10 Pilot Operated, Directional Spool Valve, DIN 24 340 & ISO 4401, CETOP–RP 121 Porting Pattern, Hydraulically Directional Spool Valve.
VALVE SIZE: 10mm, CETOP7
CONTROL METHOD: Spool type
APPLICATION Hydraulic Machines
CONNECTION TYPE: Subplate Connection
CONTROL METHOD: Hydraulic
PART NOS.: FT-WH, WEH Series
APPROXIMATE WEIGHT:4.80Kgs/10.56Lbs
RELATED PARTS:
Solenoid Valve: Directional Hydraulic Solenoid Valve
Sandwich Check Valve: Pilot Operated Check Valve
Sandwich Flow Valve: Throttle Flow Valve
Solenoids(Coils): Valve Solenoids and Coils
FEATURE:
– Fluidic actuation, spool flow control
– Size10 for subplate mounting
– Hydraulic WH type
WH Pilot operated, directional spool valve operates like a normal directional valve that is used to open and closed hydraulic flow and switch flow direction. The Directional spool valve WH series we produced is mostly used where a large flow rate of more than 100L/min is required.
WH Pilot operated, directional spool valve produced is most used in the plastic modeling machines which requires the large flow rate. The WH series of 10 size valves is often used in high flow hydraulic unit sand hydraulic systems, it usually equipped with 4WE6E, 4WE6H, 4WE6J as a pilot operated control.
Valve Ordering Code
Example (Normal code): “FT – 4WH 10 E – 20 ”
Explanation As Below:
| FT | – | 4WH | 10 | E | – | 20 | / | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| (1) | (2) | (3) | (4) | (5) | (6) | (7) | (8) |
(1) Producer code= FT
(2) Size= 10
(3) No code= Spool return by springs
H= Spool return by hydraulic
(4) Spool symbol= E,G,F, please see the spool symbol form
(5) Series no.= 20 for Size 10
50= 50 for Size 16, 25, 32
(6) No code= Without switching adjustment
S= With meter-in control adjustment
S2= With meter-out control adjustment
(7) No code = NBR seals
V = FKM seals
(8) No code = Black Galvanization
B= Blue Powder Coating
Valve Technical Information
Main Raw Materials: Casting Iron
Power: By hydraulic
Brand: Finotek or OEM
Max. Control Pressure: 25Mpa
Max. Flow Rate: 160L/min.
Media Temperature: -30 to +80(°C)for NBR O-rings
Oil Medium: Mineral oil as per DIN51 524, VDMA 24 568 or rapeseed oil, Viscosity 10 – 400 CST
Recommended Medium Filtration: ISO 4406 Standard, cleanliness class:20/18/15
Valve Spool Symbols
Pilot Oil Supply Conversion
INTERNAL & EXTERNAL SUPPLY CONVERSION
External supply: The M6 screw plug in the P port on top the main valve
Internal supply: To remove the M6 screw plug from the valve
– Refer to Drawing A
INTERNAL & EXTERNAL DRAIN CONVERSION
External drain: Remove the nut and screw in the M6 plug
Internal: Screw out the M6 plug
– Refer to Drawing B
Valve Installation Dimensions
