PRODUCT TYPE: RM27-02, Poppet Type, Pilot Operated, Cartridge Pressure Relief Valve
VALVE THREADED: M27x2.0
CONTROL METHOD: Poppet Type
APPLICATION: To Hydraulic Blocks or Manifolds
CONNECTION TYPE: Threaded, Screw-in Connection
CONTROL METHOD: Hydraulic
PART NOS.: FT-RM27 Series
APPROXIMATE WEIGHT: 0.55Kgs
RELATED CAVITY, PARTS:
Valve Cavity: Below
Valve Housings:
FEATURE:
– Four pressure setting stages, before or on working condition
– No outer leakage, dirt hydraulic oil tolerant
– 100% High pressure tested, customized threaded is available
Cartridge pressure relief valve is designed with a pressure relief function and check function together in one cartridge valve. When the operation pressure at the T port reaches the valve pre-setting pressure, the cartridge valve starts to open and let the flow out through T port to oil tank.
Finotek cartridge pressure relief valve is often installed in the hydraulic system before the cylinder to protect the cylinder while working, to avoid vacuum phenomenon happened in chamber of cylinder. Note: The cracking pressure of check valve should be smaller than different pressure offered by hydraulic system, otherwise, the valve will no use for avoiding vacuum phenomenon in hydraulic units.
RM27-02 Cartridge Pressure Relief Valve Ordering Code
Example (Normal code): “FT-RM27-02A-N-15 ” Explanation As Below:
FT- | RM27-02 | A | – | N | – | 15 |
---|---|---|---|---|---|---|
(1) | (2) | (3) | (4) | (5) |
(1) Supplier = By Finotek
(2) Valve Type = RM27-02, Poppet Type, Pilot Operated, Check Relief Cartridge Valve
(3) Adjustment: A= 1/4 in. Hex Allen Head ; B= 1-1/2 in. Dia. Alum. Knob ; C= Option A w/ Cover Cap
(4) Seals: N= Buna (Std.) ; V= Fluorocarbon
(5) Pressing Range: 15= 3.5 ~ 150bar ; 25= 20 ~ 250bar; 35= 50 ~ 315bar
RM27-02 Cartridge Pressure Relief Valve Technical Information
Working Operation Pressure: 315bar(4568psi)
Max. Flow: 150L/min.
Inner Leakage: Less than 0~3cc/min. at 80% ~ 90% nominal setting pressure
Working Tem.: -30oC to +120oC
Standard Spring Ranges: Due to manufacturing tolerances, there is a possible to adjust the valve either lower or higher than the nominal ratings
Media Temperature: -30 to +80(°C)for NBR O-rings
Body/Housing Material: Anodized 6061-T6 Aluminum alloy for pressure of 210bar(3045psi)
Oil Medium: Mineral oil as per DIN51 524, VDMA 24 568 or rapeseed oil, Viscosity 10 – 400 CST
Recommended Medium Filtration: ISO 4406 Standard, cleanliness class:20/18/15