BM10SN Hydraulic Bar Manifold

Product Name: BM10SN D05 Hydraulic Manifold Block, Series Circuit Normal Flow
Valve Size: For CETOP5 Hydraulic Valves, Size 10mm valve ports
D03 Valve Station: 1~4 Stations Optional
Raw Materials: Aluminum 6061–T6 (3000psi); Aluminum 7075-T651(3000psi); Carbon Steel: 20# Steel(4500psi), 45# Steel (5800psi)
Relief Cavity: Common cavity 10-2, relief valve T-3A Or Custom
Fluid Circuit: Series Circuit Type
Threaded: SAE, NPT, BSPP Optional
GA Port:  SAE-6 or Custom
PDF File Download:

BM10SN hydraulic bar manifold, CETOP5, NG10/Size10, D05 valve series circuit normal flow manifold is complied with the standard NFPA5 valve pattern. There is only a one P inlet and T outlet port on each side and connected with each other while the P and T port on valve mounted is connecting, which is call series circuit type manifold block.

There are only less than 4 valves stations mounted available on the D05 hydraulic manifold block, one valve blocked will stop the fluid flow in the manifold chamber, therefore this manifold is not available for more than 4 valves installation and much valve quality requirement for this series function of hydraulic manifold block.

BM10SN D05 Hydraulic Bar Manifold Pattern Standard For Below Valves:
ISO No.: 4401-03-02 series valve series mounting
Rexroth: WE series valve series mounting
Yuken: DSG series valve series mounting
Bosch: FD4 series valve mounting
Continental: V series valve mounting
Denison: A series valve mounting
Nachi: SA, SS-G01, DMA series valve mounting
Parker: D1VW series valve mounting
Vickers: (K)DG4V-3 series valve mounting

BM10SN Hydraulic Bar Manifold function symbol
BM10SN Hydraulic Bar Manifold Technical Sheet