3/2 Cartridge hammer control valve is used for controlling the excavator hammer working operation, controls its flow direction and pressure relief while the fluid flows through the pipeline. The 3/2 hammer control valve is designed in the cartridge threaded type, which saves the working place in the excavator unit, this valve can be mounted on the hammer pipeline easily, which will also take the place of the foot valve, saving the maintenance cost as well.
Feature of Finotek 3/2 Cartridge Hammer Control Valve:
> 100% tested before delivery, the test data should be qualified and matching our standard
> Different voltage of solenoids available to meet different voltage requirements.
> Quickly response to hydraulic fluid signal, more reliable working operation as per various hydraulic pressure
Available to different brand of excavator hydraulic hammers:
> Acceptable to Komatsu Excavator Hydraulic Hammer, Cat, Caterpillar Excavator Hydraulic Hammer, Doosan Excavator Hydraulic Hammer, Hitachi Excavator Breaking Hammer, Kobelco Excavator Breaking Hammer, Hyundai Excavator Broken Hammer
Technical Data Of 3/2 Cartridge Hammer Control Valve
Hydraulic hamper connector for pipeline threaded: G1/4”
Flow rate: ~ 60ml/min.
Max. pressure: 25Mpa(315bar)
Pressure adjustment range: N/A
Voltage: 12VDC, 24VDC, 220VAC (50~60hz)
Example (Normal code): “ FT-HCV08-3/2-24DN” Explanation As Below:
(1) Supplier Brand = FT, By Finotek
(2) HCV08 = Hydraulic Hammer Cartridge Valve, 08 type
(3) 3/2 = 3way, 2 spool position
(4) Voltage: 12=12VDC; 24= 24VDC; 220 = 220VAC
(5) Coil Connection: D= Double Lead;
(6) Seals: N= Buna (Std.) ; V= Fluorocarbon
(7) * For Further Information