Contact Us

Your email address will not be published. Required fields are marked *

Contact Info

Economic Development Zone,

Phone: +8657486303380

Mobile: +8613586889073

Web: http://www.finotek.com

Hydraulic Solenoid Valves

You are here: Home » Hydraulic Solenoid Valves » 4500PSI MAX. Pressure, Single Solenoid Acting Directional CETOP5, WE10, NG10 Valve

4500PSI MAX. Pressure, Single Solenoid Acting Directional CETOP5, WE10, NG10 Valve

Directional-Solenoid-Valve

PRODUCT TYPE: Solenoid Directional Valve
VALVE SIZE: 10mm, CETOP5
CONTROL METHOD: Spool type
APPLICATION Hydraulic Machines
CONNECTION TYPE: Subplate Connection
CONTROL METHOD: Hydraulic
PART NOS.: FT-WE Series
APPROXIMATE WEIGHT: 4.3Kgs/9.46Lbs
TESTING: Directional Valve Test
RELATED PRODUCT:
Subplate:  G341; G342; G502 Bottom Subplates
Solenoids(Coils):  Valve Solenoids and Coils
FEATURE: 
– Single solenoid with manual override
– Individual DIN standard plug connection
– High pressure with heavy-duty design

Solenoid directional valve is high performance solenoid operated directional control valve, there are alternative and direct voltage optional, the direct voltage of 12 or 24VDC solenoid is usually used for machines where are more manual operation systems. There are 4 way of service ports of hydraulic solenoid operated valve with A, B, P, T ports, the P and T ports are the inlet and out ports, A and B are the controlling ports, we also call operated ports. The 4 way service ports of A, B, P have same pressure of max. 315bar, but T is 160bar as a relief port.

Solenoid directional valve manufactured by Finotek is strictly tested all the key parts of the valve and especially the valve inner leakage which determines the valve work performance and service life, for size6 hydraulic solenoid operated valve, our test leakage is less than 10-20ml/min. while working.

Valve Ordering Code

Example (Normal code): “FT-4WE10 C 3X/ EG24NZ5L”
Explanation As Below:

FT- 4 WE 10 C 3X / E G24
(1) (2) (3) (4) (5) (6) (7) (8)
N Z5L /
(9) (10) (11) (12) (13)

(1) Producer code= FT
(2) Service ports= 4
  Service ports= 3
(3) Size= 10
(4) Spool symbol= E, J, H, G… please see the spool symbols below
(5) Valve series
(6) No code= With spring return
  O= Without spring return
  F= Without spring return with detent
(7) E= (Wet-pin) Solenoid with detachable coil
(8) G24= DC voltage 24V
  G12= DC voltage 12V
  W220= AC voltage 220~230V 50/60 Hz
  W110= AC voltage 110V 50/60 Hz

(9) N= With manual override
(10) Z5L= Plug-in connection with indicator lamp
(11) No code = Without Throttle insert
  B08= ThrottleØ0.8mm[0.031inch]
  B10= ThrottleØ1.0mm[0.039inch]
  B12= ThrottleØ1.2mm[0.047inch]
(12) No code = NBR seals for petroleum oil
  V = FPM seals for phosphate ester
(13) No code = Black Galvanization
  B= Blue Powder Coating

Valve Technical Information

Main Raw Materials: Casting Iron
Power: By hydraulic
Brand: Finotek or OEM
Max. Operation Pressure(T): 21Mpa
Max. Operating Pressure(P,A,B): 31.5Mpa
Max. Flow Rate: 120L/min.
Media Temperature: -30 to +80(°C)for NBR O-rings

Available Voltaege: DC:12V,24V ; AC:110V,220V
Voltage Tolerance: +10% to -15%
Switching Frequency: DC:15000Times/h; AC:7200Times/h
Oil Medium: Mineral oil as per DIN51 524, VDMA 24 568 or rapeseed oil, Viscosity 10 – 400 CST
Recommended Medium Filtration: ISO 4406 Standard, cleanliness class:20/18/15

Valve Spool Symbols

Hydraulic-Solenoid-Valve-spool-symbols

Valve Installation Dimensions

Hydraulic-Solenoid-Valve-installation-dimensions

2016-12-15T01:15:59+00:00