Valve Blocks

//For WE6 Size Directional Valves, ISO4401, NFPA 03, CETOP3 Hydraulic Valve Subplates

For WE6 Size Directional Valves, ISO4401, NFPA 03, CETOP3 Hydraulic Valve Subplates

NG6 Hydraulic Valve Subplates

PRODUCT TYPE: NG Directional Valve Subplate
CONTROL METHOD: Directional Valve Operation
APPLICATION Hydraulic Machines
CONNECTION TYPE:  Subplate Connection
PART NOS.: FT-G Series
APPROXIMATE WEIGHT: G341=0.60Kgs/1.32Lbs; G342=1.10Kgs/2.42Lbs; G502=1.90Kgs/4.18Lbs
Directional control valve division
Hydraulic solenoid valves division
– ISO, NFPA, CETOP Standard valve pattern
– For directional control valve installation
– Smooth surface without leakage

NG06/CETOP3 Subplates PDF

A hydraulic valve subplate uses for the CETOP 3 (size 06) directional valve installation. The subplate means the block is installed beneath a valve bottom. The hydraulic valve subplate is often to connect modular directional valves (The subplate converts it into threaded connection.) with piping.

The raw materials of  Finotek hydraulic valve subplate is  high strength carbon steel, casting iron or aluminum, the steel should be black galvanization after it is finished in order to prevent rust, especially in moist working conditions. The maximum working pressure for casting iron is 31.5 Mpa, but it can reach higher say more than 40Mpa if using higher strength carbon steel. But the aluminum materials can not bear high hydraulic pressure, usually below 21Mpa as max. working pressure, please contact us if you have any special requirements of the hydraulic valve subplate.

NG06/CETOP3 Hydraulic Valve Subplates Specifications

Main Raw Materials: Casting Iron or carbon steel
Power: By hydraulic
Brand: Finotek or OEM
Max. Operation Pressure Of Casting Iron: 31.5Mpa
Max. Operation Pressure Of Carbon Steel: 40Mpa

Valve Pattern Standard: DIN 24 340; ISO4401; CETOP 3 RP 121H; NFPA D03
Oil Medium: Mineral oil as per DIN51 524, VDMA 24 568 or rapeseed oil, Viscosity 10 – 400 CST
Recommended Medium Filtration: ISO 4406 Standard, cleanliness class:20/18/15

G341/01(G1/4); G341/02(M14X1.5) Dimensions

G341/01(G1/4); G341/02(M14X1.5) Dimensions

Model D1 Fixing screw (With valve)
G341/01 G1/4

4XM5 (GB70-85-10.9)
Socket Head Cap Screws

G342/01 M14X1.5

G342/01(G3/8); G341/02(M18X1.5) Dimensions

G342/01(G3/8); G341/02(M18X1.5) Dimensions

Model D1 Fixing screw (With valve)
G342/01 G3/8

4XM5 (GB70-85-10.9)
Socket Head Cap Screws

G342/02 M18X1.5

502/01(G1/2); G502/02(M22X1.5) Dimensions

502/01(G1/2); G502/02(M22X1.5) Dimensions

Model D1 Fixing screw (With valve)
G502/01 G1/2

4XM5 (GB70-85-10.9)
Socket Head Cap Screws

G502/02 M22X1.5

Contact Us

Your email address will not be published. Required fields are marked *

Contact Info

Economic Development Zone,

Phone: +8657486303380

Mobile: +8613586889073


Don`t copy text!