PRODUCT TYPE: Hydraulic Manifold For Motors
VALVE SIZE: As Per Design
CONTROL METHOD: Pressure Cartridge Valve Control
APPLICATION Hydraulic Machines
CONNECTION TYPE: Threaded Connection
CONTROL METHOD: Hydraulic
PART NOS.: FT Customized Series
– Designed for hydraulic motor control
– Pressure gauge and connector available
– High pressure up to 35Mpa, compact structure
Hydraulic manifold for motors are designed for specific hydraulic motor manufacturer, the technical is per the custom requirements, integration of cartridge hydraulic pressure control valve, check type cartridge valve, pilot operated hydraulic pressure valve and cartridge balanced valve.
Finotek selected the high certificated raw materials to manufacture the manifold which is theoretically to use the hydraulic pressure more than 40Mpa/400bar. The key parts of this hydraulic manifold for motors are the cartridge valves, Finotek tested all the cartridge valves before installation them on the manifold and adjusting the pressure on relief valve as per customer demand, therefore, it is easily to assemble the hydraulic manifold on the equipment.
Hydraulic Manifold Information
Main Raw Materials: High strenght carbon steel, 45# steel
Power: By hydraulic oil
Brand: Finotek or OEM
Max. Operation Pressure: 35Mpa
Installation type: Threaded or Panel connection (As customized)
Internal Leakage: Standard or as per requirement
Max. Flow Rate: 30L/min.
Oil Medium Temperature: -30 to +80(°C)for NBR O-rings
Oil Medium: Mineral oil as per DIN51 524, VDMA 24 568 or rapeseed oil, Viscosity 10 – 400 CST
Recommended Medium Filtration: ISO 4406 Standard, cleanliness class:20/18/15
Hydraulic Manifold For Motor Parts