Cartridge Valves - Flow Cartridge Valve

You are here: Home » Flow Cartridge Valves » FC10-20, Screw-In, Cartridge Style, Flow Control Cartridge Valve

FC10-20, Screw-In, Cartridge Style, Flow Control Cartridge Valve

PRODUCT TYPE: FC10-20, Screw-In, Needle Type, Flow Control Cartridge Valve
APPLICATION: To Hydraulic Blocks or Manifolds
CONNECTION TYPE: Threaded, Screw-in Connection
PART NOS.:FT-FC10 Series
Valve Cavity: VC10-2
Valve Housings: 10-2-Way Valve Housing
– Strictly flow control adjustment
– Key parts hardened for longer service life
– Standard industry common cavity for replacement

FC10-20 Screw-In, cartridge style, needle type, flow control cartridge valve is used for hydraulic fluid flow control, usually mounted on the back line of hydraulic circuit to strict the flow rate, keeps the stead flow and reduce the shock from hydraulic hose while operation.

Finotek FC10-20 flow control cartridge valve Flow adjustment flow control valve is also called throttle valves and throttle check valve uses for control the flow rate in a ratio. The cartridge flow adjustment valve has the check function as well to stop the reverse flow, therefore, the valve can be installed in the return pipe as throttle valve or in front of the pump as check valve temporarily.

The cartridge flow adjustment valve FC10-20 series is not the function of negative feedback, can not compensated the speed instability cause by different load weight. This valve is generally used for the situation where is a requirement for little change load weight and not critical for speed stability. Finotek flow adjustment cartridge valve is lower in throttle noise, since all the throttle parts are grinding to precisely fit dimensions. The surface of the valve are zinc or black galvanization.

FC10-20 Flow Cartridge Valve Ordering Code

Example (Normal code): “FT-FC10-20A-N-15 ” Explanation As Below:

FT- FC10-20 A N 15
(1) (2) (3) (4) (5)

(1) Supplier = By Finotek
(2) Valve Type =FC10-20 Screw-In, Needle Type, Flow Cartridge Valve
(3) Adjustment:  A= 1/4 in. Hex Allen Head ; B= 1-1/2 in. Dia. Alum. Knob ; C= Option A w/ Cover Cap

(4) Seals: N= Buna (Std.) ; V= Fluorocarbon
(5) Pressing Range:  15= 3.5 ~ 150bar ;  25= 20 ~ 250bar;  35= 50 ~ 315bar 

FC10-20 Cartridge Valve Technical Information

Working Operation Pressure: 240bar(3480psi)
Max. Flow: 45L/min.
Inner Leakage: Less than 0~0.5cc/min. (10 drops/min.)
Working Tem.:  -30oC to +120oC
Adjustment Torque Required: 0.34 Nm (3 inch-pounds) at 7 bar (100 psi); 4.50 Nm (40 inch-pounds) at 207 bar (3000 psi)

Media Temperature: -30 to +80(°C)for NBR O-rings
Body/Housing Material:
Anodized 6061-T6 Aluminum alloy for pressure of 210bar(3045psi)
Oil Medium: Mineral oil as per DIN51 524, VDMA 24 568 or rapeseed oil, Viscosity 10 – 400 CST
Recommended Medium Filtration: ISO 4406 Standard, cleanliness class:20/18/15

FC10-20 Pressure Cartridge Valve Symbol


FC10-20 Cartridge Valve Flow Performance

FC10-20 Flow Control Cartridge Valve Performance

FC10-20 Cartridge Valve Dimensions & Cavity



Contact Us

Your email address will not be published. Required fields are marked *

Contact Info

Economic Development Zone,

Phone: +8657486303380

Mobile: +8613586889073