Contact Us

Your email address will not be published. Required fields are marked *

Contact Info

Economic Development Zone,

Phone: +8657486303380

Mobile: +8613586889073

Web: http://www.finotek.com

Hydraulic Solenoid Valves

You are here: Home » Hydraulic Solenoid Valves » 4 Way Porting, 2 Operation Position, WE6, NG6, NFPA D03 Single Solenoid Valve

4 Way Porting, 2 Operation Position, WE6, NG6, NFPA D03 Single Solenoid Valve

4 Way 2 Position Solenoid Valve

PRODUCT TYPE: Solenoid Operated Directional Valve
VALVE SIZE: 6mm, CETOP3
CONTROL METHOD: Spool type
APPLICATION Hydraulic Machines
CONNECTION TYPE: Subplate Connection
CONTROL METHOD: Hydraulic
PART NOS.: FT-WE Series
APPROXIMATE WEIGHT:1.95Kgs/4.29Lbs
RELATED PARTS:
Subplate:  G341; G342; G502 Bottom Subplates
Solenoids(Coils):  Valve Solenoids and Coils
FEATURE:
– Direct solenoid operated valve
– AC or DC voltage optional
– 90 angle rotated available

4 Way 2 position solenoid valve means there are 2 working position of the valve , solenoid pushed positon when energized and spring forced spool rebound position while de-energized with 4 porting connection. The 4 Way 2 position solenoid valve function including to release and redirect the fluid that flows through it.

Our 4 Way 2 position solenoid valve has been strictly tested and applied for thousands of industrial machines and mostly used in the plastic molding machines, oil pressing machines, digital cutting machines etc., our valves are mounted on molding machines with quiet, smooth operation and enduring high working temperature.  To Related Article +

Valve Ordering Code

Example (Normal code): “FT-4WE6 E 6X/ EG24NZ5L” Explanation As Below:

FT- 4 WE 6 E 6X / E G24
(1) (2) (3) (4) (5) (6) (7) (8)

N Z5L /
(9) (10) (11) (12) (13)

(1) Producer code= FT
(2) Service ports= 4
  Service ports= 3
(3) Size= 6
(4) Spool symbol= E, J, H, G… please see the spool symbols below
(5) Valve series
(6) No code= With spring return
  O= Without spring return
  F= Without spring return with detent
(7) E= (Wet-pin) Solenoid with detachable coil
(8) G24= DC voltage 24V
  G12= DC voltage 12V
  W220= AC voltage 220~230V 50/60 Hz
  W110= AC voltage 110V 50/60 Hz

(9) N= With manual override
(10) Z5L= Plug-in connection with indicator lamp
(11) No code = Without Throttle insert
  B08= ThrottleØ0.8mm[0.031inch]
  B10= ThrottleØ1.0mm[0.039inch]
  B12= ThrottleØ1.2mm[0.047inch]
(12) No code = NBR seals for petroleum oil
  V = FPM seals for phosphate ester
(13) No code = Black Galvanization
  B= Blue Powder Coating

Valve Technical Information

Main Raw Materials: Casting Iron
Power: By hydraulic
Brand: Finotek or OEM
Max. Operation Pressure(T): 21Mpa
Max. Operating Pressure(P,A,B): 31.5Mpa
Max. Flow Rate: 60L/min.
Media Temperature: -30 to +80(°C)for NBR O-rings

Available Voltaege: DC:12V,24V ; AC:110V,220V
Voltage Tolerance: +10% to -15%
Switching Frequency: DC:15000Times/h; AC:7200Times/h
Oil Medium: Mineral oil as per DIN51 524, VDMA 24 568 or rapeseed oil, Viscosity 10 – 400 CST
Recommended Medium Filtration: ISO 4406 Standard, cleanliness class:20/18/15

Valve Spool Symbols

Hydraulic-Solenoid-Valve-spool-symbols

Valve Installation Dimensions

Hydraulic-Valve-installation-dimensions-for-size6

Packaging & Delivery

– Finotek Original Package For Exporting –

  • Environmental friendly plastic bag for each hydraulic valves.
  • Thick paper box with ordering code and some valve specification on a paper label.
  • Boxes will be packed in a 5 corrugated layers box, bubble film inside for anti-shock.

– Finotek Delivery –

  • It takes about 3-7 workings usually if the hydraulic valve in stock, we need to recheck the stock items and testing the valve again before delivery.
  • For new materials and no stock products, we may take 12-25working days approximately to manufacture the new items.
  • We will send you an order tracking page on web for following your order processing.
  • Any special requirements,  please contact us!
2016-12-18T01:36:54+00:00